Wheel Nuts and Accessories

Raceways is a leading specialist in wheel nuts and wheel accessories, with several designs of nuts being imported from USA to cater for unusual and specialist wheel nut requests.USA type nuts for cars such as the Ford Mustang, Chevy Camaro, Pontiac Firebird, Ram 1500's etc.We also cater for many classic car applications, with older threads readily available in several guises, including the Wolfrace tapered sleeve nuts and hard to find standard steel wheel nuts. For ease of use we have several sections for wheel nuts, wheel bolts, slim tuner nuts and bolts and lock nuts. There is a separate section of original equipment style wheel nuts to suit several car marques. Most wheel nuts are usually a chrome finish where as the bolts tend to be a zinc finish. We also have some of the nuts and bolts in a black paint finish, these add the finishing touch to black alloy wheels. Choose the correct nut or bolt for the wheel you are fitting, check if you have a tapered hole or radius seating where nut or bolt contacts wheel hole. For some older classic and american wheels a sleeve nut is required and here you need to check diameter and depth of hole, most will require a suitable washer. The new multi fit alloy wheels with slim holes require the narrow slim fit Tuner type nuts or bolts and these can be found in this section, including a new range of longer length tuner bolts, for use with spacers. We carry a huge range of wheel nuts so that most orders can be dispatched same day as we receive your order.Our DPD Local next day delivery service is available for urgent requirements. We have a washer section that caters for sleeve nuts in both standard and Uni-lug fit and conversion washers for taper to radius seating. Our steel inserts can replace worn out inserts or improve worn out holes etc. New in our range are the double depth slim impact sockets, with an insulated sleeve these are ideal for fitting your new wheel nuts or bolts with a protection against marking the wheel, particularly with a deep set hole. Find them in our wheel nut and wheel bolt sections, also available as a set of three in 17mm,19mm,and 21mm socket sizes, in a strong case. With the unprecedented state of the Pound to Dollar rate we have had to increase some of our wheel nut prices, particularly those supplied form USA, however we are still bringing these over to keep our stock good and be able to supply your specialist applications. Check our comprehensive range of wheel spigot rings. With over 43 years of experience in the business we can advice on most applications so please call or e-mail for help.(07834-625372). Check out the Die-Cast model section for great clearance bargains.